12kw+30kwh ESS all in one system

Dual‑MPPT Design

Dual MPPT controllers, PV range 120‑850V, max PV input 18kW, high solar‑charging efficiency for large solar array.

Smart BMS Protection

Built‑in intelligent BMS for over‑charge, over‑discharge, over‑current, short‑circuit & temperature protection, extend battery cycle life.

WIFI Cloud Monitoring

Check SOC, power data, running status & fault warning remotely by mobile APP or web browser.

Max 6 Units Parallel

Support multi‑units parallel, expand total power up to 72kW /180kWh for villa and small‑commercial projects.

Generator Compatibility

Reserved generator input port, diesel generator can charge battery when solar & grid power is insufficient.

12kW Pure Sine Wave

High‑power pure sine‑wave AC output, stable & safe for heavy‑duty household and light‑commercial devices.

All‑in‑one 12kW 30kWh solar energy storage system, large home ess cabinet

All-in-One Inverter & Battery System

12kW / 30kWh / IP21 Solar Energy Storage with WiFi APP Monitoring

How Our All-in-One ESS Works

Multi-energy input, stable power output for all household appliances

12kW 30kWh home energy storage system side profile shot

Multi-source Input Support

  • Solar Panels: Harvest solar energy via built-in MPPT controller
  • Grid: Grid charging & backup power switch for power failure
  • Generator: Work with diesel generator as supplementary charging
  • Output: Supply power for TV, air-conditioner, refrigerator, home loads
  • Cloud & APP: Real-time data monitoring via WiFi / Web platform

Key Advantages

IP21 Protection Level

Good dust-proof & water-resistant performance, suitable for balcony, outdoor shelter installation.

Smart BMS System

Built-in intelligent BMS for over-charge, over-discharge, over-current and temperature protection, extend battery cycle life.

WiFi Remote Monitoring

Check SOC, power data, running status anytime via mobile APP or web browser.

Pure Sine Wave Output

Stable pure sine-wave AC output, safe for sensitive home electronics.

Parallel Expansion Supported

Multiple units parallel to expand power & capacity for higher energy demand.

Wide MPPT Voltage Range

MPPT 120-520V, Max PV input up to 9kW, high solar charging efficiency.

Product Structure & Details

Human-oriented Design

  • Device Interface: Complete port terminals for PV, grid, load connection
  • Ventilation Hole: Efficient heat dissipation, long-time stable running
  • Device Button & Indicator: Local status check & manual operation
  • 360° Rotatable Wheels: Easy to move and relocate the whole unit
Built‑in MPPT controller of 12kW 30kWh all‑in‑one energy storage system

Technical Specifications

Model
ModelESS 12KW+30KWH
AC Input
Rated Input Voltage(VAC)220/230/240; L+N+PE
Voltage Range(VAC)90~280±3 (normal mode); 170~280±3 (UPS mode)
Frequency(Hz)50Hz/60Hz (Auto detection)
AC Output
Rated Capacity(W)12000W
Surge Power(VA)24000VA
Voltage(VAC)220/230/240
Power Factor(PF)1
Frequency50/60Hz ±0.1%
Switch Time(ms)10 (APP/UPS mode), 20 (GEN mode)
Wave FormPure Sine Wave
Overload protection(105%<load<110%)±5%: report error and turn off the output after 5 minutes; (110%<load<125%)±5%: report error and turn off the output after 10 seconds; Load>125%±5%: report error and turn off the output after 5 seconds
Max.Efficiency(Battery Mode)94%@48VDC
Charger(PV/AC)
Solar Charger TypeDual MPPTs
Max PV input current / power1*MPPT: 27A/9kW, 2*MPPTs: 22.5A/15kW
Operating Voltage Range (VDC)90Vdc~485Vdc
Max PV Open Circuit Voltage (VDC)500Vdc
Max PV Charge Current(A)160A
Max AC Charge Current(A)160A
Max.Charge Current(PV+AC)(A)160A
Battery
Nominal Battery Voltage51.2VDC
Rated Energy30KWh (0.5C, 25℃)
Usable Energy(90%DOD)27KWh
Max.Charge/Discharge Current200A/200A
Operation Voltage Range44.8Vdc~58.4Vdc
Operation Temperature-10℃~+50℃
Interface
RevealLCD
CommunicationRS485 / RS232 / USB / Dry Contact
MonitoringWiFi
General Data
Ingress ProtectionIP20
Operating Temperature-10℃~+50℃
Relative Humidity5%~95% (Non-condensing)
Storage Temperature-15℃~+60℃
Max.Operating Altitude4000m (Derating above 1000m)
DIMENSION
L×W×H (product size, mm)695×298×1550mm
L×W×H (package size, mm)755×480×1630mm

Our Factory Capacity

HMX Energy factory overview, solar ess storage system manufacturer

10+

Years Experience

8000+

Factory Area (㎡)

30+

Export Countries

20+

R&D Team

We are OEM & ODM manufacturer for all-in-one solar energy storage system. Monthly export volume over 20 containers. Strict aging test and quality inspection for every finished unit before delivery.

12kW pure sine wave output all‑in‑one 30kWh lifepo4 energy storage system
High capacity 30kWh 12kW hybrid inverter battery all‑in‑one station

Application Scenarios

Perfect for Multiple Scenarios

  • Home balcony & villa backup power
  • Off-grid remote house & countryside residence
  • Camping & off-grid cabin energy supply
  • Small shop & commercial emergency power
  • Areas with unstable grid power supply
12kW 30kWh ess power output terminal for household and commercial loads

Frequently Asked Questions

Common questions about our all-in-one solar energy storage system

Yes. It supports full off-grid operation. You only need to connect solar panels to supply power for your home loads. It also works as grid-tied backup power for blackout situation.

Built-in MPPT controller supports PV voltage 120-520V, max PV input power up to 9kW. Please match your solar panel open-circuit voltage within this range.

Yes. Built-in WiFi module. You can check SOC, charging-discharging power, running status via mobile APP or web cloud platform remotely.

Our all-in-one ESS has CE, FCC certificates. We can provide test reports for your market import clearance. OEM & ODM service is available.

Interested in Our All in One ESS?

Send your inquiry, we will reply within 24 hours, provide price list, specification and project solution support.

Get A Quote

Reach out today for your customized solar & energy‑storage solution.