HMX Energy C&I energy storage system integrates LiFePO4 battery modules and high-performance bidirectional PCS. We deliver reliable energy storage solutions for manufacturing plants, industrial parks, commercial complexes and data centres. Available in indoor cabinet and outdoor container formats with flexible capacity scaling. Full-project delivery and localised technical support are available for overseas projects.
Store cheap off-peak grid power, discharge during high-price peak hours to cut overall electricity expenditure.
Smooth power spikes, effectively reduce maximum demand charges for factories and industrial facilities.
Adopt lithium iron phosphate battery chemistry with multi-layer protection for long-cycle stable operation.
Real-time system status, remote data check, alarm notification and performance statistics via cloud platform.
Pre-integrated cabinet & container units, shorten site construction and commissioning cycle.
Cover solution design, product supply, technical guidance, commissioning and after-sales support.
The HMX-BESS-100/200 is a 215kWh air-cooled cabinet built on 280Ah cells (240 pcs), with heptafluoropropane fire protection, an integrated 3kW air conditioner and a compact 1800 × 1000 × 2350 mm footprint under 3.5 tonnes.
| Élément | Spécifications |
|---|---|
| Modèle | |
| Modèle | HMX-BESS-100/200 |
| System Nominal | |
| Puissance nominale | 105 kW |
| Capacité nominale | 215 kWh |
| AC Input / Output | |
| Tension nominale | 400 V |
| Plage de tension | 340–440 V |
| Courant nominal | 151 A |
| Fréquence nominale | 50/60 Hz |
| Facteur de puissance | >0,99 |
| DC Input / Output | |
| Tension nominale | 768 V |
| Tension minimale | 650 V |
| Tension maximale | 876 V |
| Courant nominal | 140 A |
| Capacité des cellules | 280 Ah |
| Nombre de cellules | 240 pcs |
| Capacité totale | 215 kWh |
| Battery Management | |
| Grappe de batteries | 1 pcs |
| Module de batterie | 15 pcs |
| Précision de tension | 0.20% |
| Précision de température | 1% |
| Précision SOC | 5% |
| Précision de capacité | 1% |
| Air Conditioner | |
| Méthode d'installation | Installé à l'intérieur |
| Puissance de refroidissement de l'air | 3 kW |
| Fire Protection System | |
| Agent extincteur | Heptafluoropropane |
| Méthode de pulvérisation | Direct spray |
| Durée de vie en cycles | |
| Cycle life | >6000 cycles (25°C, 0.5C) |
| Availability Rate | |
| Availability rate | >90 % |
| Physical | |
| Poids | <3.5 t |
| L × W × H | 1800 × 1000 × 2350 (mm) |
Photovoltaic panels generate DC solar power. The bidirectional PCS completes AC-DC power conversion, and energy is stored in LiFePO4 battery banks.
During high-tariff peak periods or grid failure, the stored energy discharges to supply factory and commercial loads. This delivers peak-valley arbitrage, demand-charge reduction and uninterrupted backup power for your facility.
Peak-valley arbitrage plus demand-charge control for production lines. The cabinet shaves peak load, cuts maximum demand charges and keeps critical equipment running through grid disturbances.
Solar-storage hybrid system for large-scale photovoltaic power plants. Stores midday PV surplus and releases it after sunset, raising self-consumption and smoothing the park's grid demand curve.
Emplacement : Philippines
Échelle du système : Stockage d'énergie C&I en conteneur de 4 MWh
Fonction principale : Peak valley arbitrage & backup power
L'usine de fabrication a adopté notre ESS en conteneur extérieur pour réduire les frais de demande et garantir l'alimentation électrique lors des coupures du réseau.
Emplacement : Mali
Échelle du système : 215kWh CabinetType Energy Storage
Fonction principale : Aimed at Mali’s pain points of limited grid coverage and frequent power outages (causing food spoilage in malls, life disruption in villas, safety risks at gas stations), we launched a 100kW/215kWh pure off-grid energy storage system, realizing "self-generation for self-use + parallelizable expansion" and 24/7 uninterrupted power supply.
"PV generation → energy storage → nighttime bus charging" closed loop, 100% off-grid
Emplacement : Chine
Échelle du système : Champ photovoltaïque de 625 kW + système de stockage d'énergie de 1 MWh
Fonction principale : Responds to "Dual Carbon" strategy & urban green transportation.
Energy Attribute: From "grid-dependent power sales" to "100% self-consumption" (solves peak-valley price/grid load issues)
Scenario Adaptation: Matches buses’ "day operation, night charging" via time-shifted energy supply (no municipal power needed)
Benefits: From single economic benefit to "ecology + economy + operation" triple value
Select the proper energy storage capacity according to your site’s actual load condition:
100–300 kWh cabinet-type energy storage
500–1000 kWh container-type energy storage
Above 1 MWh, customised container ESS solution
Contact our engineering team for free site evaluation and a custom-tailored solution.
C&I energy storage helps business users realise peak-valley arbitrage, reduce demand charges, provide emergency backup power and improve the self-consumption rate of on-site solar PV systems. It is widely used for factories, warehouses, commercial buildings and industrial parks.
Required capacity depends on your maximum load, local electricity tariff rules and target functions. Our engineers can offer a capacity suggestion after you provide your site load data.
Payback is mainly affected by the local electricity price difference, site load profile and system scale. In most Southeast Asia markets, the payback period ranges from 3-6 years.
Oui. Notre ESS C&I peut se connecter aux installations photovoltaïques existantes pour créer des systèmes hybrides solaire-stockage sans remplacer vos panneaux solaires actuels.
We provide remote technical guidance, an operation manual, spare parts support and local partner-assisted on-site commissioning service for overseas commercial & industrial energy-storage projects.
Vous cherchez un devis pour votre projet de stockage d'énergie industriel ou commercial ?
Veuillez partager les informations de charge de votre site, le tarif électrique local et les exigences fonctionnelles. Notre équipe d'ingénierie professionnelle répondra à votre demande dans les 24 heures ouvrables.
