HMX Energy C&I energy storage system integrates LiFePO4 battery modules and high-performance bidirectional PCS. We deliver reliable energy storage solutions for manufacturing plants, industrial parks, commercial complexes and data centres. Available in indoor cabinet and outdoor container formats with flexible capacity scaling. Full-project delivery and localised technical support are available for overseas projects.
Store cheap off-peak grid power, discharge during high-price peak hours to cut overall electricity expenditure.
Smooth power spikes, effectively reduce maximum demand charges for factories and industrial facilities.
Adopt lithium iron phosphate battery chemistry with multi-layer protection for long-cycle stable operation.
Real-time system status, remote data check, alarm notification and performance statistics via cloud platform.
Pre-integrated cabinet & container units, shorten site construction and commissioning cycle.
Cover solution design, product supply, technical guidance, commissioning and after-sales support.
The HMX-BESS-100/200 is a 215kWh air-cooled cabinet built on 280Ah cells (240 pcs), with heptafluoropropane fire protection, an integrated 3kW air conditioner and a compact 1800 × 1000 × 2350 mm footprint under 3.5 tonnes.
| Pozycja | Specyfikacja |
|---|---|
| Model | |
| Model | HMX-BESS-100/200 |
| System Nominal | |
| Moc znamionowa | 105 kW |
| 502KWh | 215 kWh |
| AC Input / Output | |
| 400V | 400 V |
| 320～460V | 340–440 V |
| 361A | 151 A |
| > 0,973 | 50/60 Hz |
| Współczynnik mocy | >0.99 |
| DC Input / Output | |
| 400V | 768 V |
| 467,5V | 650 V |
| 682,5V | 876 V |
| 361A | 140 A |
| 280Ah | 280 Ah |
| Liczba ogniw | 240 pcs |
| Całkowita pojemność | 215 kWh |
| Battery Management | |
| Klaster bateryjny | 1 pcs |
| Moduł bateryjny | 15 pcs |
| Dokładność napięcia | 0.20% |
| Dokładność temperatury | 1% |
| Dokładność SOC | 5% |
| Dokładność pojemności | 1% |
| Air Conditioner | |
| Metoda instalacji | Instalacja wewnętrzna |
| Moc chłodzenia powietrzem | 3 kW |
| Fire Protection System | |
| Środek gaśniczy | Heptafluoropropan |
| Metoda rozpylania | Direct spray |
| Żywotność cykliczna | |
| Cycle life | >6000 cycles (25°C, 0.5C) |
| Availability Rate | |
| Availability rate | >90% |
| Physical | |
| Masa | <3.5 t |
| L × W × H | 1800 × 1000 × 2350 (mm) |
Photovoltaic panels generate DC solar power. The bidirectional PCS completes AC-DC power conversion, and energy is stored in LiFePO4 battery banks.
During high-tariff peak periods or grid failure, the stored energy discharges to supply factory and commercial loads. This delivers peak-valley arbitrage, demand-charge reduction and uninterrupted backup power for your facility.
Peak-valley arbitrage plus demand-charge control for production lines. The cabinet shaves peak load, cuts maximum demand charges and keeps critical equipment running through grid disturbances.
Solar-storage hybrid system for large-scale photovoltaic power plants. Stores midday PV surplus and releases it after sunset, raising self-consumption and smoothing the park's grid demand curve.
Lokalizacja: Filipiny
Skala systemu: Kontenerowy system magazynowania energii C&I o pojemności 4 MWh
Główna funkcja: Peak valley arbitrage & backup power
Fabryka produkcyjna zastosowała nasz zewnętrzny kontenerowy system magazynowania energii (ESS) w celu obniżenia opłat za moc szczytową i zagwarantowania zasilania podczas awarii sieci.
Lokalizacja: Mali
Skala systemu: 215kWh CabinetType Energy Storage
Główna funkcja: Aimed at Mali’s pain points of limited grid coverage and frequent power outages (causing food spoilage in malls, life disruption in villas, safety risks at gas stations), we launched a 100kW/215kWh pure off-grid energy storage system, realizing "self-generation for self-use + parallelizable expansion" and 24/7 uninterrupted power supply.
"PV generation → energy storage → nighttime bus charging" closed loop, 100% off-grid
Lokalizacja: Chiny
Skala systemu: Tablica PV o moc 625 kW + system magazynowania energii o pojemności 1 MWh
Główna funkcja: Responds to "Dual Carbon" strategy & urban green transportation.
Energy Attribute: From "grid-dependent power sales" to "100% self-consumption" (solves peak-valley price/grid load issues)
Scenario Adaptation: Matches buses’ "day operation, night charging" via time-shifted energy supply (no municipal power needed)
Benefits: From single economic benefit to "ecology + economy + operation" triple value
Select the proper energy storage capacity according to your site’s actual load condition:
100–300 kWh cabinet-type energy storage
500–1000 kWh container-type energy storage
Above 1 MWh, customised container ESS solution
Contact our engineering team for free site evaluation and a custom-tailored solution.
C&I energy storage helps business users realise peak-valley arbitrage, reduce demand charges, provide emergency backup power and improve the self-consumption rate of on-site solar PV systems. It is widely used for factories, warehouses, commercial buildings and industrial parks.
Required capacity depends on your maximum load, local electricity tariff rules and target functions. Our engineers can offer a capacity suggestion after you provide your site load data.
Payback is mainly affected by the local electricity price difference, site load profile and system scale. In most Southeast Asia markets, the payback period ranges from 3-6 years.
Tak. Nasz system magazynowania energii (ESS) dla zastosowań komercyjnych i przemysłowych (C&I) może współpracować z istniejącymi instalacjami PV, tworząc hybrydowe systemy solarne-magazynowe bez konieczności wymiany obecnych paneli słonecznych.
We provide remote technical guidance, an operation manual, spare parts support and local partner-assisted on-site commissioning service for overseas commercial & industrial energy-storage projects.
Szukasz wyceny dla swojego przemysłowego lub komercyjnego projektu magazynowania energii?
Prześlij informacje o obciążeniu w swojej lokalizacji, lokalne taryfy za energię elektryczną oraz wymagania funkcjonalne. Nasz profesjonalny zespół inżynierów odpowie na Twoje zapytanie w ciągu 24 godzin roboczych.
