风冷储能系统 EHMG008-100KW-215WH

  • 该100kw/215kwh太阳能电池储能系统集成了储能电池、PCS、光伏控制器(MPPT)(可选)、BMS管理系统、EMS管理系统、配电系统、环境控制系统和消防控制系统,可全面掌控系统运行状态及风险。.
  • 配置机架式模块化PCS,支持多机并联,具有良好的可扩展性;可根据微电网等场景的太阳能储热系统容量需求,选择PCS模块数量及电池总功率。.
  • 防护等级为IP54,可完美应对各类户外天气条件。.
  • 门装嵌入式一体化空调不占用柜内空间,增加户外柜可用空间,顶部结构完整性更佳,防水效果良好。.
  • 本地控制面板可实现系统运行监控、能源管理策略制定、设备远程升级等多种功能。.

100kW / 215kWh 风冷工商业储能柜

HMX 工商业储能系统集成磷酸铁锂电池模块与高性能双向变流器(PCS)。我们为制造工厂、产业园区、商业综合体及数据中心提供可靠的储能解决方案。提供室内机柜与户外集装箱两种形式,支持灵活扩容。海外项目可提供全项目交付及本地化技术支持。.

215kwh ESS container system for factory and industria

我们工商业储能的核心优势

峰谷套利

储存低价谷电,在高价峰时段放电,降低整体电费支出。.

需量电费管理

平滑功率尖峰,有效降低工厂及工业设施的最大需量电费。.

安全可靠的磷酸铁锂电池

采用磷酸铁锂电池体系,多层保护设计,支持长循环稳定运行。.

智能云监控

通过云平台实现系统状态实时查看、远程数据查询、告警通知及性能统计。.

快速现场部署

预集成机柜与集装箱单元,缩短现场施工与调试周期。.

全项目服务

涵盖方案设计、产品供应、技术指导、调试及售后服务。.

技术参数

HMX-BESS-100/200 是一款215kWh风冷机柜,基于280Ah电芯(240颗)构建,配备七氟丙烷消防系统、集成3kW空调,紧凑尺寸为1800 × 1000 × 2350 mm,重量低于3.5吨。.

项目规格
型号
型号HMX-BESS-100/200
系统额定
额定功率105 kW
额定容量215 kWh
交流输入/输出
额定电压400 V
电压范围340–440 V
额定电流151 A
额定频率50/60 Hz
功率因数>0.99
直流输入/输出
额定电压768 V
最低电压650 V
最高电压876 V
额定电流140 A
电芯容量280 Ah
电芯数量240 pcs
总容量215 kWh
电池管理
电池簇1 pcs
电池模组15 pcs
电压精度0.20%
温度精度1%
SOC精度5%
容量精度1%
空调
安装方式内部安装
风冷功率3 kW
消防系统
灭火介质七氟丙烷
喷洒方式直接喷射
Cycle Life
循环寿命>6000次循环(25°C,0.5C)
可用率
可用率>90%
物理参数
重量<3.5 t
长 × 宽 × 高1800 × 1000 × 2350 (mm)

我们的工商业储能系统如何运作

100kw 215kwh ESS system working principle diagram PV PCS battery load energy flow chart

01 · PV Generation & AC/DC Conversion

Photovoltaic panels generate DC solar power. The bidirectional PCS completes AC-DC power conversion, and energy is stored in LiFePO4 battery banks.

02 · Peak-Shaving Discharge & Backup Power

During high-tariff peak periods or grid failure, the stored energy discharges to supply factory and commercial loads. This delivers peak-valley arbitrage, demand-charge reduction and uninterrupted backup power for your facility.

典型应用场景

100kw 215kwh Commercial industrial energy storage applied in manufacturing factory production site

Factory & Manufacturing Plant

Peak-valley arbitrage plus demand-charge control for production lines. The cabinet shaves peak load, cuts maximum demand charges and keeps critical equipment running through grid disturbances.

Solar‑storage hybrid C&I energy storage system for photovoltaic industrial park

PV Industrial Park

Solar-storage hybrid system for large-scale photovoltaic power plants. Stores midday PV surplus and releases it after sunset, raising self-consumption and smoothing the park's grid demand curve.

我们的工商业储能安装案例

定制光储一体化解决方案

定制光储一体化解决方案

地点: Philippines
系统规模: 4MWh集装箱式工商业储能
主要功能: Peak valley arbitrage & backup power
该制造工厂采用我们的户外集装箱式储能系统,以降低需量电费并保障电网停电期间的电力供应。.

纯离网储能系统

纯离网储能系统

地点: 马里
系统规模: 215kWh CabinetType Energy Storage
主要功能: Aimed at Mali’s pain points of limited grid coverage and frequent power outages (causing food spoilage in malls, life disruption in villas, safety risks at gas stations), we launched a 100kW/215kWh pure off-grid energy storage system, realizing "self-generation for self-use + parallelizable expansion" and 24/7 uninterrupted power supply.

PV generation energy storage nighttime bus charging closed loop, 100% off-grid

100% Off-Grid PV + Storage Bus Charging

"PV generation → energy storage → nighttime bus charging" closed loop, 100% off-grid
地点: 中国
系统规模: 625kW光伏阵列 + 1MWh储能系统
主要功能: Responds to "Dual Carbon" strategy & urban green transportation.
Energy Attribute: From "grid-dependent power sales" to "100% self-consumption" (solves peak-valley price/grid load issues)
Scenario Adaptation: Matches buses’ "day operation, night charging" via time-shifted energy supply (no municipal power needed)
Benefits: From single economic benefit to "ecology + economy + operation" triple value

系统配置参考

Select the proper energy storage capacity according to your site’s actual load condition:

Small Factory · 100–300 kW Load

100–300 kWh cabinet-type energy storage

Medium Plant · 300–800 kW Load

500–1000 kWh container-type energy storage

Large Industrial Park

Above 1 MWh, customised container ESS solution

Contact our engineering team for free site evaluation and a custom-tailored solution.

关于工商业储能的常见问题

工商业储能帮助工商业用户实现峰谷套利、降低需量电费、提供应急备用电源,并提高现场光伏系统的自消纳率。它广泛应用于工厂、仓库、商业楼宇和产业园区。.

所需容量取决于您的最大负载、当地电价规则和目标功能。在您提供现场负载数据后,我们的工程师可以为您提供容量建议。.

投资回收期主要受当地电价差、站点负载曲线及系统规模影响。在大多数东南亚市场,投资回收期为3至6年。.

是的。我们的工商业储能系统可以连接现有的光伏装置,构建光储混合系统,无需更换您当前的光伏组件。.

我们为海外工商业储能项目提供远程技术指导、操作手册、备件支持以及当地合作伙伴协助的现场调试服务。.

获取您的定制工商业储能解决方案

正在为您的工业或商业储能项目寻找报价?

请分享您的现场负载信息、当地电价和功能需求。我们的专业工程团队将在24个工作小时内回复您的咨询。.

获取报价

立即联系我们,获取您的定制太阳能及储能解决方案。.