HMX Energy C&I energy storage system integrates LiFePO4 battery modules and high-performance bidirectional PCS. We deliver reliable energy storage solutions for manufacturing plants, industrial parks, commercial complexes and data centres. Available in indoor cabinet and outdoor container formats with flexible capacity scaling. Full-project delivery and localised technical support are available for overseas projects.
Store cheap off-peak grid power, discharge during high-price peak hours to cut overall electricity expenditure.
Smooth power spikes, effectively reduce maximum demand charges for factories and industrial facilities.
Adopt lithium iron phosphate battery chemistry with multi-layer protection for long-cycle stable operation.
Real-time system status, remote data check, alarm notification and performance statistics via cloud platform.
Pre-integrated cabinet & container units, shorten site construction and commissioning cycle.
Cover solution design, product supply, technical guidance, commissioning and after-sales support.
The HMX-BESS-1000/2000 is a 20-foot air-cooled containerised ESS rated at 1MW / 2MWh, with heptafluoropropane pipeline fire protection and an integrated 10kW air conditioning system.
| Élément | Spécifications |
|---|---|
| Modèle | |
| Modèle | HMX-BESS-1000/2000 |
| System Nominal | |
| Puissance nominale | 500 kW × 2 |
| Capacité nominale | 2010 kWh |
| AC Input / Output | |
| Tension nominale | 400 V |
| Plage de tension | 320–460 V |
| DC Input / Output | |
| Tension nominale | 598.4 V |
| Tension minimale | 467,5 V |
| Tension maximale | 682.5 V |
| Battery Management | |
| Grappe de batteries | 12 pcs |
| Module de batterie | 132 pcs |
| Air Conditioner | |
| Méthode d'installation | Installé à l'intérieur |
| Puissance de refroidissement de l'air | 10 kW |
| Fire Protection System | |
| Agent extincteur | Heptafluoropropane |
| Méthode de pulvérisation | Type de canalisation |
| Durée de vie en cycles | |
| Cycle life | >6000 cycles (25°C, 0.5C) |
| Physical | |
| Poids | <25 t |
| L × W × H | 12192 × 2438 × 2896 (mm) |
Photovoltaic panels generate DC solar power. The bidirectional PCS completes AC-DC power conversion, and energy is stored in LiFePO4 battery banks.
During high-tariff peak periods or grid failure, the stored energy discharges to supply factory and commercial loads. This delivers peak-valley arbitrage, demand-charge reduction and uninterrupted backup power for your facility.
Reliable UPS-grade backup power for critical IT infrastructure. Instant switchover protects servers and network equipment from outage-related downtime and data loss.
Peak load shaving and emergency backup power for commercial buildings. The system trims maximum demand charges while keeping lighting, HVAC and retail operations running.
Emplacement : Philippines
Échelle du système : Stockage d'énergie C&I en conteneur de 4 MWh
Fonction principale : Arbitrage pointe-creux et alimentation de secours
L'usine de fabrication a adopté notre ESS en conteneur extérieur pour réduire les frais de demande et garantir l'alimentation électrique lors des coupures du réseau.
Emplacement : Mali
Échelle du système : Stockage d'énergie en armoire de 215 kWh
Fonction principale : Aimed at Mali’s pain points of limited grid coverage and frequent power outages (causing food spoilage in malls, life disruption in villas, safety risks at gas stations), we launched a 100kW/215kWh pure off-grid energy storage system, realizing "self-generation for self-use + parallelizable expansion" and 24/7 uninterrupted power supply.
"PV generation → energy storage → nighttime bus charging" closed loop, 100% off-grid
Emplacement : Chine
Échelle du système : Champ photovoltaïque de 625 kW + système de stockage d'énergie de 1 MWh
Fonction principale : Responds to "Dual Carbon" strategy & urban green transportation. Energy Attribute: From "grid-dependent power sales" to "100% self-consumption" (solves peak-valley price/grid load issues)
Scenario Adaptation: Matches buses’ "day operation, night charging" via time-shifted energy supply (no municipal power needed)
Benefits: From single economic benefit to "ecology + economy + operation" triple value
Select the proper energy storage capacity according to your site’s actual load condition:
100–300 kWh cabinet-type energy storage
500–1000 kWh container-type energy storage
Above 1 MWh, customised container ESS solution
Contact our engineering team for free site evaluation and a custom-tailored solution.
C&I energy storage helps business users realise peak-valley arbitrage, reduce demand charges, provide emergency backup power and improve the self-consumption rate of on-site solar PV systems. It is widely used for factories, warehouses, commercial buildings and industrial parks.
Required capacity depends on your maximum load, local electricity tariff rules and target functions. Our engineers can offer a capacity suggestion after you provide your site load data.
Payback is mainly affected by the local electricity price difference, site load profile and system scale. In most Southeast Asia markets, the payback period ranges from 3-6 years.
Oui. Notre ESS C&I peut se connecter aux installations photovoltaïques existantes pour créer des systèmes hybrides solaire-stockage sans remplacer vos panneaux solaires actuels.
We provide remote technical guidance, an operation manual, spare parts support and local partner-assisted on-site commissioning service for overseas commercial & industrial energy-storage projects.
Vous cherchez un devis pour votre projet de stockage d'énergie industriel ou commercial ?
Veuillez partager les informations de charge de votre site, le tarif électrique local et les exigences fonctionnelles. Notre équipe d'ingénierie professionnelle répondra à votre demande dans les 24 heures ouvrables.
