Grid-Forming vs Grid-Following BESS: A Procurement Test

A procurement guide to selecting and verifying grid-forming or grid-following BESS controls for weak grids, islands and industrial microgrids.
BESS Capacity Augmentation: Protect Usable Energy Over Project Life

A B2B guide to defining usable energy, performance-test triggers, compatible expansion interfaces and lifecycle budgets for battery storage capacity augmentation.
Battery SOH Testing: Build a Repeatable Capacity Acceptance Test

Specify a defensible battery SOH test with a matched capacity reference, measurement boundary, controlled conditions, uncertainty and warranty evidence.
EU Battery Passport: A 2027 Data Plan for BESS Importers

Prepare industrial battery passport data for EU BESS imports: 2027 scope, supplier evidence, model and serial records, access controls and lifecycle updates.
EV Charging BESS Sizing: Model the Recharge Window First

Size an EV charging BESS around repeatable service: grid headroom, charging sessions, recharge windows, usable energy, controls and procurement evidence.
Golf Cart Lithium Range: A Loaded Route Test for Fleet Buyers

Specify a golf cart lithium route test that checks payload, hills, measured energy, reserve and recharge turnaround before accepting a fleet battery upgrade.
Inverter Firmware Updates: Retest the Functions Your Project Uses

Control inverter firmware updates with a saved configuration, verified release purpose and project-specific retesting of backup, battery and export functions.
Can a Hybrid Inverter Run Without a Battery? Check Each Mode

Can a hybrid inverter run without a battery? Separate grid-connected PV, daytime emergency output, night backup and off-grid operation before buying.
PV Oversizing on a Hybrid Inverter: Separate Clipping from Input Limits

Review PV inverter DC oversizing without confusing allowable array power, string voltage, MPPT current, thermal derating and battery charging constraints.
Home Battery SAT: Prove Backup with the Customer’s Actual Loads

Build a home battery commissioning checklist around actual household loads, backup transfer, reserve settings and recovery evidence before customer handover.
Home Battery Location: Flood Risk, Access and Local Fire Rules

Choose a home battery location by checking flood exposure, escape routes, maintenance access and local fire rules before approving the installation layout.
Replacing Lead-Acid in a Solar System: Review the Charger Before the Pack

Review chargers, equalisation, BMS shutdown response and legacy DC loads before replacing a lead-acid solar battery bank with an approved LiFePO4 system.